Introducing the new TK-D740HV/D840HU mobiles, launched together with the new TK-D240V/D340U portables and completing KENWOOD’s impressive DMR
system line-up. Thanks to compliance with MIL-STD and IP54 environmental standards, they can be relied on through thick and thin. As well as handling
both analog and digital communications, these user-friendly DMR radios can even operate in direct mode, without a repeater. They also offer KENWOOD
Call Interrupt and also benefit in having KENWOOD enhanced audio quality. These truly resourceful team members will enable you to make the most
of your legacy analog equipment while also benefitting from digital communications.
Two-Slot TDMA
Belonging to the DMR Tier II category, which
covers licensed conventional systems, these
radios are specified for 2-slot Time Division
Multiple Access (TDMA) operation in 12.5 kHz
channels. This means they can offer greater
spectrum efficiency.
Two-In-One - Digital & Analog
These DMR radios can operate in both digital
and FM analog modes, switching automatically
as needed. Interoperability with legacy analog
radios allows organizations to migrate to full
digital at their own pace.
Dual-Slot Direct Mode
Up to two simultaneous direct-mode subscriber
calls can be supported in a 12.5 kHz channel,
without requiring a repeater, thus doubling
channel capacity.
Call Interruption
In an emergency or whenever a user needs to
interrupt a call, Call Interrupt is available in
both direct and repeater modes, while encoding
or decoding. Also featured are emergency
functions to help protect staff in remote areas, etc.
Tough All-Terrain
These TK-D740HV/D840HU mobile radios conform to
MIL-STD C/D/E/F/G standards for ruggedness,
and are IP54 rated for dust & water protection,
making them more than capable of withstanding
harsh operating conditions.*
2-Digit LED Channel Display with Brightness Control
The large 2-digit LED display provides a clear
indication of which channel is being used, and
the brightness level can be adjusted (high/low)
to suit the time of day and ambient light conditions.
The front panel also features 9 programmable
function keys for enhanced operating ease.
Programmable Blue LED
The blue LED indicator can be customized to
provide useful status information. For example,
it can be used in combination with the orange
LED for Selective Call differentiation.
Clear, Powerful Audio
A radio’s most important quality is clarity –
being able to hear, loud and clear, what the
other party is saying, and these mobiles deliver
just that. For instance, the AMBE+2™ VOCODER
technology accurately replicates natural human
speech nuances for superior voice quality, even
with high levels of ambient noise. Additionally,
Voice Announcement can confirm the channel
number, so there is no need to look at the display.
English is the default language, but Spanish and
French are also available.
Other Features
- Max. 32 ch in 2 zones (16 ch per zone)
- Wide
70 MHz UHF coverage
- External D-sub 15-pin
(DE-15) interface
- External speaker connector
(3.5 mm diameter phone jack)
- Audio output
power 4 W @ 4 ?
- GPS connectivity (available
later)
- Single zone and Normal scanning
functions
- Horn alert/P.A. function
- Ignition
sensing
- Password protection (read/overwrite)
- Minimum volume setting
- Embedded message
- Selective call alert LED
- Late entry
- Analog
signalling: QT/DQT, FleetSync, 2-tone (available
later)
- Compander per channel
- Squelch level